KY-96A Comm

Precio:
Precio OH:
Consultar precio de instalacion
Dimensiones: 1.35 inches (h) x 6.312 inches (w) x 10.776 inches (d)
Peso: 2.8lbs

Operates at 28 volts 760 COMM frequencies from 118.00 MHz to 136.975 MHz "Flip-flop" frequency switching which allows ease and speed through the push of a button. You can switch between active and standby frequencies Up to nine channels can be easily programmed by the pilot into the memory of the KY 96A. This is in addition to the two displayed frequencies for a total storage capacity of eleven frequencies The KY 96A remember displayed frequencies and stored frequencies without batteries or external battery hookup during power shutdown or in the event of a power interruption An easy-to-read, illuminated LCD display. The display, as well as the lighted push buttons, are connected to the aircraft panel lighting bus and brighten or dim to provide maximum clarity in either darkened or daylight conditions A consistent audio level -- automatically amplifying weak audio signals and muting those which are too strong Equipped with an audio amplifier to drive a speaker for installations not utilizing an audio panel A flashing display will alert the pilot to a microphone that becomes stuck for two minutes. To keep from jamming the frequency, the KY 96A will also automatically disable their transmitters Frequencies can be changed directly into the "USE" window, bypassing the darkened "STBY" window

FEATURES

VHF Communications Transceiver with Liquid Crystal Display

Operates 760 frequencies from 118.00 to 136.975 MHz (version dependent, see table below)

Flip-flop frequency switch to transfer between active and standby frequencies

Remote switch may be installed as an additional means of providing flip-flop function

9 programmable memory channels in addition to the two displayed frequencies

Non-volatile frequency storage without batteries or external battery hookup

Audio leveling automatically amplifying weak audio signals and muting those which are too strong

Stuck microphone indication through flashing display

5 watts minimum power output

28 volt operation only

Models available with 25Khz or 50KHz selectivity (see table below)

Models available with different audio outputs (see table below)

Same as KY-97A VHF Comm but KY-96A operates on 28 volt only

TSO'd

SPECIFICATIONS
Size:	6.25"W x 1.3"H x 10.50"L	Weight:	2.9 lbs.
TSO Compliance (Transmitter):	TSO C37c, Class 4	TSO Compliance (Receiver):	TSO C38c, DO-186 Class C & D (-10/30/50/60/70 models); TSO C38c, DO-186 Class A & B (-51/61 models)
Power Output:	5 Watts min.	Duty Cycle:	1 minute on, 4 minutes off
Temperature Range:	-20 to +55C	Frequency Range:	118.00 to 136.975MHz in 25KHz increments
Modualtion:	70% modulation with 90% limiting. Less than 15% distortion at 70% modulation	Receiver Sensitivity:	2uV (hard) or less for 6dB S+N/N with 1KHz tone modulated 30%

KY-96A

Part Number	VHF Communications Transceiver Description
064-1052-10	25Khz receiver selectivity, 500ohm headphone audio output, 720 channels
064-1052-30	25Khz receiver selectivity, 500ohm headphone audio output, 760 channels
064-1052-50	25Khz receiver selectivity, 8W into 4ohm audio output, 720 channels
064-1052-51	50Khz receiver selectivity, 8W into 4ohm audio output, 720 channels
064-1052-60	25Khz receiver selectivity, 8W into 4ohm audio output, 760 channels
064-1052-61	50Khz receiver selectivity, 8W into 4ohm audio output, 760 channels
064-1052-70	Crown series version of -60 unit with solid black face and no silver lining trim